Portable Keysight (Agilent) N9962A FieldFox Handheld Microwave
Analyzer, 50 GHz
Description of Keysight (Agilent) N9962A
- 50 GHz max frequency
- Accurate spectrum analyzer measurements (± 0.5 dB) without
preheating
- Intuitive spectrogram display and recording make it easy to locate
interference signals
- Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)
- The 10mhz gap-free real-time bandwidth captures intermittent
signals
- Combined with the USB power sensor, average power and pulse power
can be easily measured, and combined with the time gating function,
pulse parameters can be measured
- A portable solution enables characterization of radar pulses
- Perform air interface measurements for 5gTF and LTE
- Capture I/Q data for RF signal monitoring and analysis
- Provides geolocation and time stamp using GPS/GNSS
The N9962A is a portable microwave spectrum analyzer that uses
battery power. Optional features include a full-band tracking
generator and preamplifier, interference analyzer, time gating,
VSWR, reflection, built-in power meter and GPS receiver.
| Maximum Frequency | 50 GHz |
|---|
| Minimum Frequency | 9 kHz |
|---|
| SA Start Frequency | 5 kHz |
|---|
| System Dynamic Range | 110 dB |
|---|
| Cable and antenna analyzer | No |
|---|
| Output Power | up to 4 dBm |
|---|
| Appearance factor | n/a |
|---|
| Number of Built-In Ports | 2 ports |
|---|
| Instrument Type | Spectrum Analyzer |
|---|
| Spectrum Analyzer | Yes - Standard |
|---|
| Measuring function | Signal analysis Real-time spectrum analysis |
|---|
| Overall amplitude accuracy | ±3dB |
|---|
| Types | Handheld |
|---|
| System Features | - Built-In DC Source
- GPS Receiver - Internal Only
- Remote Control Capability
|
|---|
| Power Measurement Using USB Sensor | - Frequency-Offset
- Frequency-Offset
- RF Pulse Test with Peak Sensor
|
|---|
| Standard Attenuator Range | 30 dB |
|---|
| Standard Attenuator Step | 5 dB |
|---|
| DANL @1 GHz | -159 dBm |
|---|
| Maximum Analysis Bandwidth | 10 MHz |
|---|
| Phase Noise @1 GHz (1 MHz offset) | -113 dBc/Hz |
|---|
| Phase Noise @1 GHz (10 kHz offset) | -111 dBc/Hz |
|---|
| Phase Noise @1 GHz (30 kHz offset) | -108 dBc/Hz |
|---|
| TOI @1 GHz (3rd Order Intercept) | +13 dBM |
|---|
| Maximum Real-Time Bandwidth | 10 MHz |
|---|
| Bandwidth Options | 10 MHz (standard) |
|---|
List of Options
| 030 | Remote Control Capability |
| 208 | USB Power Sensor Measurements Versus Frequency |
| 209 | Extended Range Transmission Analysis (ERTA) |
| 210 | Vector Network Analyzer Transmission/Reflection |
| 235 | Pre-amplifier |
| 236 | Interference Analyzer and Spectrogram |
| 238 | Spectrum Analyzer Time Gating |
| 302 | USB power sensor support |
| 307 | GPS Receiver |
| 309 | DC Bias Variable Voltage Source |
| 310 | Built-in Power Meter |
| 312 | Channel Scanner |
| 320 | Reflection measurements (return loss, VSWR and scalar measurements) |
| 330 | Pulse Measurements |
| 350 | Real-time Spectrum Analyzer (RTSA) |
| 351 | I/Q Analyzer (IQA) |
| 355 | Analog Demodulation |
| 356 | Noise Figure measurements |
| 370 | Over the air LTE FDD measurements |
| 377 | Over the air 5G TF measurements |
| 358 | EMF measurements |
| 352 | Indoor and outdoor mapping |
| 371 | Over the air LTE TDD measurements |
| 361 | EMI measurements |
| 353 | IQ streaming |
| 1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) |
| A6J | ANSI Z540-1-1994 Calibration |
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
