| B10 | External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI
and for retrofit of |
| B102 | 100 KHz - 2.2 GHz |
| B103 | 100 KHz - 3 GHz |
| B104 | 100 KHz - 4 GHz |
| B105 | 100 KHz - 6 GHz |
| B11 | Baseband Generator with ARB (64 Msample) and Digital Modulation
(realtime |
| B12 | Output attenuator for tracking generator |
| B13 | Baseband Main Module |
| B14 | Fading Simulator |
| B15 | Fading Simulator Extension |
| B16 | Differential I/Q Output |
| B17 | Analog Baseband Input |
| B18 | Removable Hard Disk (Flash Card) for R&S® ESU |
| B19 | Second Hard Disk (Flash Card) for R&S® ESU-B18 |
| B20 | FM/ Ø Modulation |
| B202 | RF Path B 100 KHz - 2.2 GHz |
| B203 | RF Path B 100 KHz - 3 GHz |
| B22 | FM/ Ø Modulation w/ Enhanced Phase Noise Performance |
| B24 | Internal preamplifier 100kHz to 40GHz; gain 30dB nominal (For EMI
Test Receiver R&S® ESU40; |
| B30 | Overvoltage Protection |
| B31 | High Output Power |
| B32 | Overvoltage Protection and High Output Power |
| B35 | RF Path B Overvoltage Protection |
| B36 | RF Path B High Output Power |
| B37 | RF Path B Overvoltage Protection and High Output Power |
| B4 | OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| B9 | Baseband Generator with ARB (128 Msample) and Digital Modulation
(realtime |
| C3 | Three years of calibration coverage based on the R&S
recommended calibration interval - includes test data. The first
calibration is included with product delivery with 2 additional
depot calibration(s). |
| C5 | Five years of calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 4 additional depot
calibration(s). |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| DKD | ESU40 DKD (ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
| ESPIK50 | Trigger for coverage measurements with EMI Test Receivers R&S
ESPI and R&S ESU |
| ESU26-DKD | ESU26 DKD (ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
| ESU8-DKD | ESU8 DKD (ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
| FS-K7 | FM demodulator, allows measurement of FM specific parameters (for
FMU, FSP, FSU) |
| FSP-B10 | External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI
and for retrofit of |
| FSU-B12 | Output attenuator for tracking generator for FSU, FSQ |
| FSU-B4 | OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| FSU-B9 | Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz |
| K11 | Dig. Std. IS-95 |
| K12 | Dig. Std. cdma2000 |
| K40 | Digital standard GSM/EDGE, 1160.7609.02 |
| K42 | Dig. Std. 3GPP FDD |
| K43 | Dig. Std. 3GPP Enh. BS/MS Test incl. HSDPA |
| K47 | Dig. Std. 1xEV-DO |
| K53 | Time Domain Scan FFT based scan for very fast overview measurements |
| K55 | Dig. Std. E-UTRA |
| K7 | FM demodulator, allows measurement of FM specific parameters (for
FMU, FSP, FSU) |
| R3 | Three years of depot repair coverage, including re-calibration if
necessary to complete the repair. First year of repair coverage is
provided by the 12-month new product warranty. |
| R5 | Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. First year of repair coverage is
provided by the 12-month new product warranty. |
