Used E5061B ENA Vector Network Analyzer 5 Hz to 3 GHz Impedance
Measurement
Description of E5061B ENA Vector Network Analyzer
The Agilent E5061B is a member of the ENA Series network analyzers.
The E5061B addresses a broad range of measurement needs of
electronic components and circuits from low to high frequencies.
The E5061B now provides a new standard of frequency-domain device
analysis from 5 Hz to 3 GHz.
RF NA Options: E5061B-115/117/135/137/215/217/235/237
Solid performance in an enhanced platform
The E5061B RF Network Analyzer options are the successors of the
E5061/62A and they provide high-performance network analysis for
testing RF components, including cellular BTS filters/antennas, MRI
coils, RFIDs, and CATV components. A wide variety of test set
options allows you to select the best configuration to suit your
test requirements and budget.
LF-RF NA Option: E5061B-3L5
Comprehensive LF-to-RF network analysis
The E5061B-3L5 LF-RF NA option offers versatile network analysis in
the broad frequency range from 5 Hz to 3 GHz. Comprehensive LF
network measurement capabilities including built-in 1 MO inputs
have been seamlessly integrated with the high-performance RF
network analyzer. The E5061B-3L5 is the right solution for
component and circuit evaluations in the R&D environment.
E5061B-3L5 LF-RF network analyzer option plus 005 impedance
analysis option - NA plus ZA in one box
The E5061B-005 provides the impedance analysis (ZA) firmware for
the E5061B-3L5 LF-RF network analyzer. This option enables the
analyzer to measure impedance parameters of electronic components
such as capacitors, inductors, and resonators. The combination of
NA and ZA capabilities further enhances the analyzer’s versatility
as a general R&D tool.
Test Set Options
50O RF NA Options:
Option 115 Transmission / Reflection test set, 100 kHz to 1.5 GHz
Option 135 Transmission / Reflection test set, 100 KHz to 3 GHz
Option 215 S-parameter test set, 100 kHz to 1.5 GHz
Option 235 S-parameter test set, 100 kHz to 3 GHz
75O RF NA Options:
Option 117 Transmission / Reflection test set, 100 kHZ to 1.5 GHz
Option 137 Transmisson / Reflection test set, 100 kHz to 3 GHz
Option 217 S-parameter test set, 100 kHz to 1.5 GHz
Option 237 S-parameter test set, 100 kHz to 3 GHz
LF RF NA Option
Option 3L5 5 Hz to 3 GHz
When you just can’t wait
Evaluate the pre-configured E5061BEP ENA series network analyzer –
express configuration
RF-NA option
- 100 kHz to 1.5 GHz / 3 GHz
- Transmission / Reflection test set and S-parameter test set
- 50 O and 75 O system impedance
LF-RF NA option
- 5 Hz to 3 GHz
- 50 O S-parameter test set
- Gain-phase test port (1 MO / 50 O inputs)
- DC-bias source
- Impedance analysis function (option 005)
List of Options
005
| Impedance analysis for LF-RF network analyzer |
006
| Wireless power transfer analysis |
010
| Time domain/fault location analysis |
019
| Standard hard disk drive |
020
| Standard hard disk drive |
115
| Transmission/Reflection test set, 100 kHz to 1.5 GHz, 50 ohm system
impedance |
117
| Transmission/Reflection test set, 100 kHz to 1.5 GHz, 75 ohm system
impedance |
135
| Transmission/Reflection test set, 100 kHz to 3 GHz, 50 ohm system
impedance |
137
| Transmission/Reflection test set, 100 kHz to 3 GHz, 75 ohm system
impedance |
1A7
| ISO 17025 compliant calibration |
1CM
| Rack mount kit |
1CN
| Front handle kit |
1CP
| Rack mount and front handle kit |
1E5
| High stability timebase |
215
| S-parameter test set, 100 kHz to 1.5 GHz, 50 ohm system impedance |
217
| S-parameter test set, 100 kHz to 1.5 GHz, 75 ohm system impedance |
235
| S-parameter test set, 100 kHz to 3 GHz, 50 ohm system impedance |
237
| S-parameter test set, 100 kHz to 3 GHz, 75 ohm system impedance |
3L3
| LF-RF network analyzer with DC bias source, 5 Hz to 500 MHz |
3L5
| LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz |
720
| Add 50 ohm resistor set |
721
| Add GPIB |
731
| Add Handler IO |
810
| Add keyboard |
820
| Add mouse |
A6J
| ANSI Z540 compliant calibration |
PS-S20
| Startup assistance |
R-50C-011-3
| Agilent Calibration - 3 years |
R-50C-011-5
| Agilent Calibration - 5 years |
R-50C-021-3
| ANSI Z540-1-1994 Calibration - 3 years |
R-50C-021-5
| ANSI Z540-1-1994 Calibration - 5 years |
R-51B-001-3C
| Return to Agilent Warranty - 3 years |
R-51B-001-5C
| Return to Agilent Warranty - 5 years |
R-51B-001-C
| Return to Agilent Warranty - 1 year |
Win10
| |
WIN7
| |
WXP
| Windows XP |
Our Service:
One-stop service from manufacture to shipping.
1. Your inquiry related to our products or prices will be replied
in 24hours.
2. Well-trained and experienced staffs to answer all your enquires
influent English.
3. Distributor ship is offered for your unique desigh and some our
current models.
4. Protection of your sales area, ideas of design and all your
private information.
FAQ:
1. Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
