10-C3 | Three years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
10-C5
| Five years of calibration coverage based on the R&S recommended
calibration interval - includes test data. |
10-R3
| Three years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
10-R5
| Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
02
| 2 Port |
03
| 3 Port |
04
| 4 Port |
1145.1010.08
| 2 PORT VNA |
1145.1010.10
| 4 PORT VNA |
14
| Vector network analyzer 2 ports, 10MHz - 14GHz compact size |
14-DKD
| ZVB20 DKD(ISO17025) calibration including ISO 9000 calibration
(order only with device) |
B21
| Generator Step Attenuator ZVB4, ZVB8, port 1, mechanical, 70dB max. |
B22
| Generator Step Attenuator ZVB4, ZVB8, port 2, mechanical, 70dB max. |
B23
| Generator Step Attenuator ZVB4, ZVB8, port 3, mechanical, 70dB max.
ZVB 4-port: 3 atts at P1,P2,P3 possible |
B24
| STEP ATTENUATOR RECEIVER PORT 2 |
B31
| Receiver Step Attenuators |
B34
| Receiver Step Attenuators |
B4
| Oven Oscillator (OCXO) |
| C3 | Three years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
| C5 | Five years of calibration coverage based on the R&S recommended
calibration interval - includes test data. |
DCV-2
| Documentation of calibration values |
DCV-ZP
| Printout of DCV (additional, in combination with DCV-Option only) |
DKD
| ZVB8 DKD(ISO17025) calibration incl. ISO 9000 calibration (order
only with device) |
K2
| Time domain (for ZVA, ZVB, ZVT) |
K3
| Mixer and Harmonics Measurements |
PSL-Z10
| OPTICAL MOUSE WITH USB INTERFACE |
PSL-Z2
| KEYBOARD WITH USB INTERFACE |
R3
| Three years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
R5
| Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
RAM
| 50/75 OHM MATCHING PAD(MATCH BOTH ENDS) |
RAZ
| 50/75 OHM MATCHING PAD (AT ONE END) |
RVZ
| POWER SPLITTER, 50 OHM, DC-2700MHZ, N(F) |
Z4
| DC BLOCK, 10KHZ-18GHZ |
ZV-Z32
| PC 3.5 CALIBRATION KIT |
ZV-Z33
| PC 3.5MM CALIBRATION KIT |
ZV-Z51
| CALIBRATION UNIT 8GHZ, 4 PORT, N(F) |
ZVAB-B18
| Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5
(factory installed only) |
ZVAB-B18
| Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or
FMR7/6 |
ZVAB-B18
| Removable hard disk 160GB (including firmware) for R&S® ZVA and
R&S® ZVB with FMR7 |
ZVAB-B4
| OVEN QUARTZ, HIGHER ACCURACY STABILITY |
ZVAB-K2
| TIME DOMAIN |
ZVAB-K30
| Noise figure measurement on 2 port devices (for ZVA and ZVT, |
ZVB-K3
| MIXER AND HARMONIC MEASUREMENTS |
ZVB8/10-C3
| 3YRS DEPOT CALIBRATON COVERAGE |
ZVB8/10-R3
| 3YRS OF DEPOT REPAIR COVERAGE |
