B-B18
| Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5
(factory installed only) |
B-B18
| Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or
FMR7/6 |
B-B18
| Removable hard disk 160GB (including firmware) for R&S® ZVA and
R&S® ZVB with FMR7 |
B-B4
| Oven quartz (OCXO) for ZVA, ZVB, ZVT |
B-K2
| Time domain (for ZVA, ZVB, ZVT) (software license) |
B-K30
| Noise figure measurement on 2 port devices (for ZVA and ZVT, |
B16
| Direct Generator and Receiver Access for 2 Ports |
B18
| Removable Flash Disc |
B21
| Generator Step Attenuator Port 1; mechanical, 70dB in 10dB-steps |
B22
| Generator Step Attenuator Port 2; mechanical, 70dB in 10dB-steps |
B23
| Generator Step Attenuator Port 3; mechanical, 70dB in 10dB-steps,
40 GHz |
B24
| Generator Step Attenuator Port 4; mechanical, 70dB in 10dB-steps,
40 GHz |
B31
| Receiver Step Attenuator Port 1; mechanical, 35dB in 5dB-steps |
B32
| Receiver Step Attenuator Port 2; mechanical, 35dB in 5dB-steps |
B33
| Receiver Step Attenuator Port 3; mechanical, 35dB in 5dB-steps,
40GHz |
B34
| Receiver Step Attenuator Port 4; mechanical, 35dB in 5dB-steps,
40GHz |
B7
| Measurements on pulsed signals. Pulse Profile,Recording time up to
25ms, up to 30MHz bandwidth |
B7
| Measurements on pulsed signals. Pulse profile,Recording time up to
25ms, up to 30MHz bandwidth |
B8
| External attenuator control. Control unit for electronic
attenuators of ZVAZ90E, ZVA-Z110E |
C3
| hree years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
C3
| Three years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
C5
| Five years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
C5
| Five years of depot calibration coverage based on the R&S
recommended calibration interval - includes test data. |
DCV-2
| Documentation of calibration values |
DCV-ZP
| Printout of DCV (additional, in combination with DCV-Option only) |
| K10 | Group delay measurement on converters without LO access. For long
distances via LXI network of 2 ZVA or ZVT. |
K17
| Increases the receiver bandwidth to 5MHz (software license) |
K2
| Time domain (for ZVA, ZVB, ZVT) |
K27
| Two internal pulse generators (for ZVA and ZVT) (software license) |
K4
| Mixer- and frequency converting measurements for ZVA and ZVT
(software license) |
K5
| Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT;
R&S®ZVA/T-B16 and R&S®ZVA-K4 required) |
K6
| True Differential Measurements for all 4-port ZVA and for ZVT with
at least 3 ports |
K7
| Measurements on pulsed signals pulse profile, recording time up to
3ms up to 30 MHz bandwidth |
K8
| Control of frequency converters (for ZVA with f>20 GHz, ZVT20,
includes ZVA-K4) |
K9
| Measurement of group delay on frequency converters without LO
access (for ZVA, ZVT; |
R3
| Three years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
R3
| Three years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
R5
| Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
R5
| Five years of depot repair coverage, including re-calibration if
necessary to complete the repair. |
