Keysight N9935A FieldFox Handheld RF Analyzer 9 GHz Microwave
Spectrum Analyzer
Description of Keysight Agilent N9935A Microwave Spectrum Analyzer
Keysight's FieldFox handheld spectrum analyzers are equipped to
handle your toughest working environments during routine
maintenance, in-depth troubleshooting, and anything in between.
Choose the Keysight FieldFox configuration that best meets your
needs.
Specification of Keysight Agilent N9935A Microwave Spectrum Analyzer
- Make accurate spectrum analyzer measurements (± 0.5 dB) without
warmup.
- Carry one lightweight unit at 3.0 kg (6.6 lb).
- Perform over-the-air measurements for 5G TF and LTE.
- Characterize radar pulse profiles with a portable solution.
- Use GPS/GNSS for geolocation and timestamping.
- Capture I/Q data for RF signal monitoring and analysis.
- Capture intermittent signals with 10 MHz gap-free, real-time
bandwidth.
In microwave, radar, satellite communications, and commercial
microwave backhaul, you may be responsible for hardware
installation and maintenance as well as over-the-air signal
quality. This could require regular monitoring for unexpected
signals and performing signal surveillance. FieldFox’s spectrum
analyzer will excel in a dynamic spectral environment. You may face
measurement challenges such as the need to detect a low-level
signal under strong signal conditions (requiring high dynamic
range), or close-in small interference signals (requiring excellent
phase noise). FieldFox’s superior dynamic range (TOI +15 dBm),
close in phase noise (-117 dBc/Hz at 10 kHz offset), and fast sweep
time make these challenging tasks easier. FieldFox’s spectrum
analyzer also provides a full power measurement suite and complete
trace and state control.
Vector Network Analyzer
FieldFox includes options for VNA transmission/reflection (T/R)
capability for S11 and S21 measurements, or with full 2-port
capability for measurements of all four S-parameters and full
2-port calibration. With a full 2-port network analyzer, you can
measure the forward and reverse characteristics of your component
without having to disconnect, turn around, and reconnect it to the
analyzer. Additionally, the full 2-port calibration gives you the
best measurement accuracy possible. FieldFox’s four independent,
sensitive receivers provide 117 dB of dynamic range for measurement
of high rejection, narrowband devices such as cavity filters. The
receivers also enable full 2-port error correction with the unknown
thru method, allowing users to measure non-insertable devices
accurately and easily. FieldFox’s calibration engine is the same
engine that powers the well-respected Keysight ENA and PNA network
analyzers. FieldFox leverages Keysight microwave expertise to
deliver consistent measurements with Keysight benchtop VNAs.
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual
delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
